search icon

Concora Medium Fluter

Instrument voor het maken van samples voor het uitvoeren van CMT en CCT testen. Het toestel is voorzien van een digitaal display van de temperatuur. De segmenten worden binnen 15 minuten verwarmd en het toestel is zeer energiezuinig (450 Watt). Door de lage warmt uitstraling kan het toestel ook in een klimaat gecontroleerd  laboratorium geplaatst worden.


Applicable standards:
APPITA/AS 1301.434s

• Directly heated riffle plates
• Energy optimized – power consumption only 200 W instead of 2,000 W
• Temperature control via digital display
• Optionally available with interchangeable riffle plates
• “Third Hand” for correct application of adhesive tape is included in delivery

The Concora Medium Fluter is a user friendly and efficient instrument. The samples are inserted from above. The heating is built into the riffle segments. Therefore heat transmission is very efficient and uniform. The instrument takes approx 15 minutes until the working temperature of 176 °C is reached. The temperature can be set accurately to 1° C. A spring-loaded, easily adjustable system helps to reduce the cost of maintenance. Normally the instrument is delivered with a fixed set of “A” riffle segments. It can be optionally ordered with one or more exchangeable sets of riffle segments. Flute A, B and C are available (others on request). Changing the riffle plates is very easy and only takes about 2 minutes. A “Third Hand” for correct application of adhesive tape is included in delivery.

Test description
A sample of 6 x ½” (152 x 12.7 mm) is prepared by means of a sample punch. It is inserted into the sample intake at the top of the instrument. When the start button is pressed it is drawn in and is moulded by the heated riffle plates. It is then ejected below and can be taken out. The riffle plates return to their initial position. It is important that the sample has the correct width of 12.7 mm. The instrument is optionally available with a double sample intake for samples of 12.7 mm and samples of 15 mm (according to GOST standard).

• Concora Medium Fluter with “A” riffle segments.
• Distance between the teeth: 8.5 ± 0.05 mm
• Height of the teeth: 4.75 ± 0.05 mm
• “Third Hand” with 10 flutes of approx. 19 mm length and 3 ± 0.1 mm height
• Contact pressure of the riffle segments: 100 ± 10 N
• Rotational speed of riffle segments: 4.5 ± 1 upm
• Digital temperature control
• Standard delivery with flute “A”
• Optionally available: Instrument P95962 with interchangeable riffle segments (flutes A, B, C, and others on request or according to customer’s specification)

Technische Daten
Electricity: 110 – 220 v, 50 – 60 Hz
Water supply: None
Compressed air: None
Dimensions (WxDxH): 50x35x36 cm
Net weight: 19 kg
Gross weight: 26 kg

Product Downloads